Function
Baking color logo, photo image or picture on the hat surface for advertising, gift purpose with artistic and applied effects.
Feature
Digital temperature indicator
Automatic temperature constant
Even pressure heat-resistant material remains stable up to 400
Automatic baking time control
Pressure adjustable
Full hat surface heat transfer print

Specification
Voltage 220V/110V

 Power: 550W

 Temperature range: 0- 400

 Time control range: 0 s to 600s

Weight 13.5KG

 Packing size: 230 X 300 mm
Operation
1Place a shaped hat, close the handle with appropriate pressure and then plug the power;
Caution! The machine must to be protective earthlings properly before operating.
Avoid excessive pressure.
2Cut the picture size to be large as the hat surface and then put it to the hat by adhesive tape.
3Setting the temperature to an appropriate (between 150- 180) by turning the temperature knob;
4Setting appropriate time, approximate 20 seconds, the temperature rising time is 2 to 4 minutes;
5Place the picture-raged hat, close the handle and then turn on the power, red indicator lighting;
Caution! The size of picture should be large enough to cover the whole hat surface to avoid singe and impress.
6The machine shall start the timer automatically and enter the status of constant temperature when the temperature rises to the setting degree;
7Release the handle when the buzzer rings and take out the hat;
Get rid of the picture paper 3 seconds after the hat to be took out from the machine.
Caution! For protecting the heating mat, place the shaped hat all the time and close the handle when the machine is not being used.
Another piece of paper should be used to cover the hat surface to avoid the direct touch of the hat surface with the heating mat, when the picture is too small to cover the whole hat surface.

Adjusting
Pressure To adjust the handle to increase or reduce the pressure.
Time To set the timer to the appropriate time, around 30 seconds.
Temperature Turn the temperature knob to set the appropriate temperature, between 150- 180
Caution The machine needs 2 minutes break every 60 minutes working period when in mass production.
Problems shooting
Color too light The baking time is not enough, so add more baking time which will get the real color.
Blurred image The baking time is too long, just reduce the baking time will make the image distinct.
Partly color light Caused by the short pressure or the coating is uneven, need to increase the pressure or replace hat with uneven coating.
Blurred image caused by heating mat replace the heating mat.
Scar on image The baking time is much too long; just reduce the baking time largely to remove